Views: 8 Author: Site Editor Publish Time: 2019-12-11 Origin: Site
1. The lubricating grease of polyurethane spraying machine shall be sufficient and clean at all times, and there shall be no leakage at the joints of each lubricating pipeline. Check the lubrication condition of each operation part at any time. If there is any oil shortage, stop the machine for inspection immediately to prevent accidents.
2. The lubricating oil in the reducer shall be kept at the designated position, too much or too little will cause unstable use and failure of the sprayer.
3. Check the amount of lubricating oil in the air compressor before use. The lubricating oil is the special lubricating oil for the air compressor.
4. Apply grease (Vaseline, etc.) to mechanical structural parts to prevent surface exposure from rusting. Equipment placed for a long time shall be fully lubricated.
5. Before lubrication, clean the lubricating oil nozzle to prevent foreign impurities from immersing into the damaged shaft and shaft sleeve. Good lubrication can be obtained by completely filling the lubricating part with new grease.
